Cutting out a tele body from some mind-blowing wood.Very brittle, but I have infused it with resin for stability.Seems to work 🙂
Beautiful wood
20 June, 2020
Getting lacquered
20 June, 2020
He’s Fret-lightning!!
4 June, 2020
Doing some high-speed fretwork.:-)
Semi-hollow progress
3 June, 2020
Current progress on the semi-hollow; Got the neck fretted, tuners fitted and fixed it to the body. I handcrafted a volume and tone control from the excess neck wood. The top is still not glued on. It’s held together by double sided tape. Beside that, I still have an installation of Bridge and stopbar/trem to do.Then a lot of fine sanding and details like fret markers and final clear coat before I can wrap this build up 
Weight as it is now = 2.9 kg/6.4 lbs
Neck next
2 June, 2020
The neck is going to be as beautiful as the rest of the guitar. 🙂
Electronics in
29 May, 2020
Fitted the electronics and added some shading to the front and backside.
Give me my coat!
28 May, 2020
Getting ready for clear coat.
Real guitars have curves
22 May, 2020
Making some curves in the semi-hollow horns. Both for looks, but mainly to get easy access to the lower frets.
Some still pictures of the current work.
Video below:
Routing the trussrod channel in neck intended for the semi-hollow.
Backside of the semi-hollow
21 May, 2020
Doing some finish work on the backside of the semi-hollow I’m building
Outstanding
19 May, 2020
When finished, this one will stand out for sure
